Internal Volume markers, Silicone Handle Grips, and two welded full couplers on this all stainless kettle make it an attractively affordable option.

A ball valve, nipple, and plug are included for the welded couplers. A thermometer, or kettle screen can be added separately

Features:

• 25 Gallon Stainless Steel Brewmaster Brewing Kettle
• Two Welded 1/2" Full Couplers allow for internal and external attachments
• Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler
• Stainless 1/2" Plug included for top coupler
• Stamped Volume Markers
• Silicone Handle Grips
• Internal Threading allows for conversion to Mash Tun or addition of whole hop filters
• Approximate Internal Dimensions: 23.5" Tall x 17.75" Ø
• Kettle constructed from 201 stainless steel
  

This item does not work with induction burners.

Boil Kettles: We recommend always doing a full wort boil, as do most brewing texts and advanced brewers. This minimizes the addition of top-up water to compensate for boil-off, and starting with the volume called for in your recipe will let you know early in the process if you've hit your target gravity, giving you more time to correct possible issues. Also, you'll get more consistent hop utilization by sticking to the recipe volumes, as utilization changes significantly with specific wort gravity. Last, but certainly not least, is boil-over prevention. Having enough head space will keep this irritating problem at bay.

We recommend a boil kettle approximately 2 times the size of the finished batch size. Although this may seem like a large volume, a typical 10 gallon batch will start with a 13 to 14 gallons pre-boil volume. This will allow for a reasonable head space to reduce boil-over problems. For example, if you're a 10 gallon batch brewer, you'd select the 20 gallon BoilerMaker™G2 brew kettle.